The plastic-encapsulated series NM position switches are used for monitoring
end positions of sliding doors and movable machine parts. These safety
switches are available with 5 different actuator heads:
- Roller plunger
- Dome plunger
- Roller arm
- Roller level
- Hinged actuator
|
|

|
|
|
|
Therefore, every user can employ the optimum actuator element for his
application.
The simple changeability of the actuator heads in 4 approach directions
permits maximum flexibility. Two basic housings are available with up to 3
contact elements. The narrow design as well as installation in any position
ensures integration in all automation and fitting technology sectors.
|
|
|
|
Features:
- Protective insulation by means of reinforced thermoplastic housing
material, environmental protection IP67
- High mechanical service life· 8 different actuation heads with same
basic housing
- Compact size with maximum function
- Easy and fast changing of 4 approach directions
- 3 cable entries on side and bottom (Type NM11…, NM02…,NM12…,NM03…)
- Large-sized connection terminals for each contact element
- Contact elements:
- 1 positively driven NC (Type NM01…)
- 1 positively driven NC + 1 NO (Type NM11…)
- 2 positively driven NC (Type NM02…)
- 2 positively driven NC + 1 NO (Type NM12…)
- 3 positively driven NC (Type NM03)
|
|

|
|
|
|
Series NM…Type 2
Features:
- Protective insulation by means of reinforced thermoplastic housing
material
- Compact size with maximum function
- 4 lateral approach directions
- 1 approach direction from top
- Easy and fast changing of the approach direction
- Increased actuator travel of 4 mm
- Small approach radius with straight/bent actuator
- 1-3 cable entries on side and bottom
(Type NM11..., NM02...,NM12..., NM03...)
- Large-sized connection terminals for each contact element
- Contact elements:
- 1 positively driven NC (Type NM01…)
- 1 positively driven NC + 1 NO (Type NM11…)
- 2 positively driven NC (Type NM02…)
- 2 positively driven NC + 1 NO (Type NM12…)
- 3 positively driven NC (Type NM03)
|
|

|